Wide Open Design Revolution 2.0 Rock Crawler 2 Seat Chassis CAD Rendered Photo View 1

Revolution 2.0 Rock Crawler Chassis

Evolution Rock Crawler Chassis

  • A smaller "Hill Killer" style rock crawler chassis built for strength and style
  • Perfectly designed for trail riding and competing in various forms of Off Road Racing
  • Rock Crawler Chassis is 50" at it widest point
  • 110" to 122" wheel base
  • Proper 4-link Geometry - accepts most popular axle configurations

Typical Lead Time: 4 - 6 weeks

Buggy Galleries that use this chassis:

As low as $5,999.99
SKU
Evolution Rock Crawler Chassis

Chassis Questions? We've got Answers!

Typical Lead Time: 4 - 6 weeks

The Wide Open Design Evolution Rock Crawler chassis was initially designed for trail riding and competing in various forms of off road racing. Strength, space and style were all thoroughly thought out when designing this chassis.


The demand came for a smaller "Hill Killer" style chassis like this one. While keeping true to our roots, we wanted strength and style in this rock crawler chassis. We knew we could give up a little space, due to the type of use this buggy would be built for.

Along comes the "Evolution Chassis". Our 50" wide 2 seat chassis for the folks that like to beat down in the woods. We incorporated many ideas from our other buggies into this one. Built for big horsepower, full width axles, big tires, and hill killin'. The Evolution has a more laid back A pillar, a much shorter rear end, slightly shorter front end and over all lower roof line.

Hammer Down for Longer

Our Heavy Duty (HD) design places 1.75 x .188 wall tubing in the high impact areas where extra strength is needed.

A chassis built entirely out of .120 wall tubing will keep occupants safe in a roll over, but leaves the chassis vulnerable to getting dented and bent. The increased strengthening of a few key impact areas allows the chassis to have a better chance of remaining straight and is less likely to dent from sudden impacts. A heavy duty chassis only adds a minimum amount of weight and you’ll have a chassis that will hold up for years to come.

For specific tubing sizes used to build this chassis and their location, reference these images:

Evolution Chassis Tubing Size 1 Evolution Chassis Tubing Size 2 Evolution Chassis Tubing Size 3 Evolution Chassis Tubing Size 4

Sides are Protected with Replaceable .188 Tubing Rock Sliders

.188 wall rock sliders act as protection to the sides of your Rock Bouncer. They also double as a step to ease entry and exit from your buggy if you have not chosen to have doors installed. We’ve built these into the chassis that if they do get beat up, they can be easily cut off and replaced with new .188 Tubing RB Rock Sliders

.188 wall rock sliders act as protection to the sides of your Rock Bouncer. They also double as a step to ease entry and exit from your buggy if you have not chosen to have doors installed. We’ve built these into the chassis that if they do get beat up, they can be easily cut off and replaced with new .188 Tubing

RB Rock Sliders

 

Adequate Rear End Room for Fuel Cell and Tool Box/Cooler

Easily fit a 15 gallon fuel cell and a fabricated tool box in the rear end. Have fun trail riding and bring along a few tools that you may need. Or use the tool box as a cooler for your beverages and food.

 

Install and Remove Components with Ease

Removable Crossmembers allow for easily installing and removing of drive train components into the chassis. These tubes are connected using our Tube Flange sets. RB Removable Crossmembers

Removable Cross members allow for easily installing and removing of drive train components into the chassis. These tubes are connected using our Tube Flange sets.

RB Removable Crossmembers

Correct 4 Link Installation Every Time

The chassis was designed for Proper 4-link Geometry and accepts the most popular axle configurations. Hesitant that it won't fit yours? We can let you know for sure. Email us at [email protected] or give us a call at (615) 962-9135 to confirm.

 

Beautiful and Professional MIG Welded Fabrication

Our MIG welds are more than just strong, they are professional and good looking also. Our fabricators have years of experience welding onto our chassis and have developed the quality you’d expect from a professional facility. You get reliability and a great looking rig.

 

Full Support throughout your Build

When you purchase a Wide Open Design chassis, you are also purchasing full build support and guidance. We’ve built a large amount of buggies starting from our chassis and can answer pretty much any question you have in the process. We also have designed and manufactured components specific to our chassis to reduce guesswork and guarantee a great end product.

 

Build your Dream Rock Bouncer!

If there are modifications you may want done to the chassis, we may be able to do it! For a quote on chassis configuration, rolling chassis or turn-key vehicle please email [email protected] or give us a call at (615) 962-9135 with your ideal specifications.

 

Technical Specifications:

  • Wheel Base - 110" to 122"
  • Widest Point - 50"
  • Weld Type - MIG
  • Main steel structure construction - 1 3/4"x.120 wall DOM steel tubing
  • The lower bars at the belly pan construction - 1 3/4"x.188 wall DOM steel tubing
  • Rocker bars construction - 1 3/4" x .188 wall DOM steel tubing

 

Available Added Options:

 

Rock Bouncer X Tubing Size 4

Check Out Buggy Galleries that use this Chassis:

TN Mojo Rock Bouncer Rock Crawler BuggyWiloughbuy Evolution Rock Bouncer Rock Crawler Buggy Jeepolution Rock Bouncer Rock Crawler Buggy McKinney Evolution Rock Bouncer Rock Crawler Buggy

More Information
Product Name Evolution Rock Crawler Chassis
Brand Wide Open Design
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Customer Questions
No Questions

No Related Posts

We found other products you might like!

Questions? Give us a Call(615) 962-9135